- Title
- Mercury emissions and removal by ash in coal-fired oxy-fuel combustion
- Creator
- Spörl, Reinhold; Belo, Lawrence; Shah, Kalpit; Stanger, Rohan; Giniyatullin, Roman; Maier, Jörg; Wall, Terry; Scheffknecht, Günter
- Relation
- Xstrata Coal Low Emissions R&D Corporation Pty Ltd..CC08-71
- Relation
- Energy & Fuels Vol. 28, Issue 1, p. 123-135
- Publisher Link
- http://dx.doi.org/10.1021/ef4014604
- Publisher
- American Chemical Society
- Resource Type
- journal article
- Date
- 2014
- Description
- This paper presents results of experiments performed at a 20 kW once-through combustion rig of the Institute of Combustion and Power Plant Technology (IFK) of the University of Stuttgart. A methodology to investigate oxy-fuel process configurations was used in which impurities were injected to the oxidant gas of the once-through reactor to simulate different extents of oxy-fuel recycle gas treatment. Three Australian coals, which had previously been tested in the Aioi furnace of IHI in Japan, were used in the experiments. A comprehensive set of total (Hgtot), elemental (Hg0), and oxidized (Hg2+) mercury concentrations was measured for various air and oxy-fuel combustion conditions. These data enable an evaluation of process parameters that influence the Hg emissions of an oxy-fuel combustion process. A theoretical mass balance between Hg fed to the process (fuel and Hg0 injection) and Hg measured before the filter matched well, indicating that no mercury was captured by fly ash at high temperatures. The capture of Hg0 and oxidized Hg2+ by ash in a baghouse filter has been determined for all experiments. Measured Hg concentrations show an increase when switching from air to oxy-fuel operation for all investigated coals and oxy-fuel settings, even when no additional Hg0 is injected to the oxidant gas. Moreover, the Hg2+/Hgtot ratios in the flue gas are higher during oxy-fuel combustion. The Hg capture by ash in the baghouse filter has been found to reduce the Hg emissions considerably. Reduction rates in a range between 18 and 51% for air and between 11 and 29% for oxy-fuel combustion were observed.
- Subject
- oxy-fuel combustion; Australian coals; gas treatments
- Identifier
- http://hdl.handle.net/1959.13/1302484
- Identifier
- uon:20478
- Identifier
- ISSN:0887-0624
- Language
- eng
- Reviewed
- Hits: 2853
- Visitors: 3075
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|